ITC065 VSL EN

Notes on dimensioning

Choosing parallel axis model, it must be born in mind that, while for automatic machines it may seem useful to maximise rest time and minimise displacement time, the lengthening of the time dedicated to displacement contributes to decrease elastic vibrations and inertia loads.

In fact, the torque due to inertia is directly proportional to the square of the number of cycles and inversely proportional to the square of the displacement angle. The best solution lies in a compromise between displacement time and rest time.

Calculation of the torque applied to the output shaft is essential for choosing indexer wheelbase (I). In fact, by increasing I, the indexer can tolerate greater torque on the output shaft.

The torque applicable to the output shaft is divided into static torque (Ms) and dynamic torque (Mu). The first one is a constant of the mechanism, while the second one is a decreasing function of the number of cycles, due to forces of inertia applied to the mechanism.

In choosing the number of stops (S), consider that when possible it is best to choose the lowest number of stations, so that the torque required at parallel axis output is decreased.

Distance between centres 65 mm

Name	Numero di stazioni	Angolo di spostamento [°]	Cv	Ca	Ck	Statico	25 rpm	50 rpm	100 rpm	125 rpm	200 rpm	300 rpm	400 rpm	500 rpm	hf:att:pa_numero-di-stazioni	hf:att:pa_angolo-di-spostamento	hf:att:pa_cv	hf:att:pa_ca	hf:att:pa_ck
65-1-260	1	260	1,27	8,01	0,99	52,06	51	49,92	47,77	46,69	43,42	39	34,54	30,01	1-en	260-en	127	801	099
65-1-270	1	270	1,27	8,01	0,99	54,34	53,23	52,11	49,87	48,75	45,37	40,83	36,26	31,66	1-en	270-en	127	801	099
65-1-300	1	300	1,27	8,01	0,86	57,98	56,79	55,61	53,24	52,06	48,52	43,82	39,14	34,47	1-en	300-en	127	801	086
65-1-330	1	330	1,35	7,02	0,83	66,92	65,55	64,19	61,48	60,14	56,15	50,91	45,77	40,73	1-en	330-en	135	702	083
65-2-150	2	150	1,27	8,01	0,86	57,98	55,62	53,28	48,69	46,44	39,83	31,41	23,41	15,84	2-en	150-en	127	801	086
65-2-180	2	180	1,4	6,62	0,79	65,55	62,89	60,27	55,15	52,65	45,42	36,38	28,02	20,33	2-en	180-en	14	662	079
65-2-210	2	210	1,4	6,62	0,68	65,55	62,89	60,27	55,18	52,7	45,53	36,62	28,44	21	2-en	210-en	14	662	068
65-2-225	2	225	1,4	6,62	0,59	57,5	55,17	52,87	48,4	46,22	39,94	32,13	24,96	18,43	2-en	225-en	14	662	059
65-2-240	2	240	1,4	6,62	0,59	77,63	74,48	71,38	65,37	62,45	54,04	43,64	34,17	25,64	2-en	240-en	14	662	059
65-2-270	2	270	2	6,28	0,87	81,85	78,52	75,26	68,94	65,87	57,05	46,17	36,31	27,46	2-en	270-en	2	628	087
65-2-300	2	300	1,4	6,62	0,47	80,5	77,24	74,03	67,81	64,8	56,13	45,46	35,8	27,14	2-en	300-en	14	662	047
65-3-120	3	120	1,4	6,62	0,79	81,65	79,43	77,22	72,83	70,66	64,2	55,75	47,49	39,41	3-en	120-en	14	662	079
65-3-150	3	150	1,4	6,62	0,63	67,85	66,01	64,18	60,55	58,76	53,46	46,59	39,92	33,47	3-en	150-en	14	662	063
65-3-180	3	180	1,76	5,53	0,66	56,35	54,82	53,3	50,31	48,84	44,5	38,91	33,54	28,4	3-en	180-en	176	553	066
65-3-210	3	210	1,76	5,53	0,56	57,5	55,94	54,4	51,36	49,86	45,47	39,84	34,48	29,38	3-en	210-en	176	553	056
65-3-240	3	240	1,76	5,53	0,49	57,5	55,94	54,4	51,37	49,88	45,51	39,93	34,63	29,62	3-en	240-en	176	553	049
65-3-270	3	270	1,76	5,53	0,44	59,52	57,9	56,3	53,17	51,63	47,13	41,4	35,97	30,84	3-en	270-en	176	553	044
65-4-90	4	90	1,37	6,45	0,73	61,72	60,45	59,17	56,57	55,25	51,24	45,72	40,02	34,14	4-en	90-en	137	645	073
65-4-120	4	120	1,76	5,53	0,74	65,55	64,21	62,87	60,2	58,86	54,87	49,58	44,32	39,09	4-en	120-en	176	553	074
65-4-150	4	150	1,76	5,53	0,59	77,63	76,04	74,47	71,34	69,79	65,19	59,17	53,3	47,57	4-en	150-en	176	553	059
65-4-180	4	180	1,76	5,53	0,49	77,63	76,04	74,47	71,36	69,81	65,26	59,34	53,6	48,03	4-en	180-en	176	553	049
65-4-210	4	210	1,76	5,53	0,42	59,8	58,58	57,37	54,97	53,79	50,28	45,73	41,31	37,04	4-en	210-en	176	553	042
65-4-240	4	240	1,76	5,53	0,37	62,1	60,84	59,58	57,09	55,87	52,25	47,56	43,04	38,67	4-en	240-en	176	553	037
65-4-270	4	270	1,76	5,53	0,33	51,75	50,7	49,65	47,58	46,56	43,54	39,64	35,88	32,25	4-en	270-en	176	553	033
65-5-180	5	180	1,76	5,53	0,59	83,38	81,68	79,99	76,65	75,01	70,15	63,86	57,79	51,94	5-en	180-en	176	553	059
65-6-75*	6	75	1,4	6,62	0,62	54,82	51,86	48,99	43,46	40,8	33,3	24,36	16,63	11,84	6-en	75-en	14	662	062
65-6-90*	6	90	1,76	5,53	0,66	81,46	77,07	72,81	64,62	60,7	49,66	36,59	25,41	18,69	6-en	90-en	176	553	066
65-6-135*	6	135	1,76	5,53	0,44	68,57	64,88	61,29	54,41	51,12	41,85	30,9	21,56	16,01	6-en	135-en	176	553	044
65-6-150*	6	150	1,4	6,62	0,63	62,29	58,94	55,68	49,42	46,44	38,02	28,07	19,58	14,52	6-en	150-en	14	662	063
65-8-60*	8	60	1,76	5,53	0,74	61,72	59,21	56,75	51,97	49,65	42,96	34,68	27,13	20,33	8-en	60-en	176	553	074
65-8-75*	8	75	1,4	6,62	0,47	57,5	55,17	52,88	48,43	46,27	40,05	32,38	25,41	19,13	8-en	75-en	14	662	047
65-8-90*	8	90	1,76	5,53	0,49	77,63	74,48	71,39	65,41	62,51	54,18	43,96	34,74	26,52	8-en	90-en	176	553	049
65-8-105*	8	105	1,76	5,53	0,42	57,5	55,17	52,88	48,45	46,3	40,14	32,57	25,74	19,65	8-en	105-en	176	553	042
65-8-120*	8	120	1,76	5,53	0,37	72,45	69,51	66,63	61,05	58,35	50,6	41,1	32,55	24,95	8-en	120-en	176	553	037
65-8-135*	8	135	1,76	5,53	0,33	47,15	45,24	43,36	39,73	37,97	32,92	26,73	21,16	16,19	8-en	135-en	176	553	033

* Stop cycle + rotation performed with a 180 ° rotation of the input shaftTHESE DATA MAY BE MODIFIED FOR IMPROVEMENTS WE DEEM APPROPRIATE

ITC065 VSL EN

Notes on dimensioning

You are about to be disconnected from the Italcamme site.

I confirm